Android 4G 模块添加 TV平台Mstar HISI

Android9.0 HIsi

Android 8.0Mstar

Android 4.4 Hisi

模块有方N720

首先根据模块方添加linux驱动 一般不会出现很大的问题    

这个模块是USB 串口的更改option.c（路径一般为 kernel/drivers/usb/serial/option.c）具体以供应商手册为准。

后面的添加也是照搬

最主要一步 添加驱动hisi 有可能会打不开make kernel_menuconfig

直接把这个加到你对应板子的Deconfig就可以了

CONFIG_USB_SERIAL=y
# CONFIG_USB_SERIAL_CONSOLE is not set
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_SIMPLE is not set
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP210X is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_F81232 is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_METRO is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_MXUPORT is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_QCAUX is not set
# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
CONFIG_USB_SERIAL_WWAN=y
CONFIG_USB_SERIAL_OPTION=y
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_XSENS_MT is not set
# CONFIG_USB_SERIAL_WISHBONE is not set
# CONFIG_USB_SERIAL_SSU100 is not set
# CONFIG_USB_SERIAL_QT2 is not set
# CONFIG_USB_SERIAL_DEBUG is not set

            android.hardware.radio.deprecated
                  hwbinder
                 1.0
                                  IOemHook
                                  slot1
                  android.hardware.radio
                  hwbinder
                  1.1
                                  IRadio
                                 slot1
                                  ISap
                                  slot1

--- a/core/init/selinux.cpp
+++ b/core/init/selinux.cpp
@@ -89,6 +89,7 @@ EnforcingStatus StatusFromCmdline() {
 }
 bool IsEnforcing() {
+       return false;
     if (ALLOW_PERMISSIVE_SELINUX) {
         return StatusFromCmdline() == SELINUX_ENFORCING;
     }

	ro.telephony.default_network=10 \//默认网络选择可避免只有2g
	persist.sys.pref.net.type=10 \
	ro.com.android.dataroaming=true \//这个是数据漫游可加可不加
	ro.com.android.prov_mobiledata=true \//这个是必须加的 不加打不开网络的
	ro.radio.noril=false \ //这个必须改为false否则系统会认为你没有数据网络
	vendor.rild.libpath=/vendor/lib/libreference-rilecyoufang.so//这个是给rild加载库的参数详情见rild.c
附录：
安卓网络首选项修改如下参数：
	路径（因平台而异）：
	frameworks/base/telephony/java/com/android/internal/telephony/RILConstants.java 
	安卓默认参数设置：
	int PREFERRED_NETWORK_MODE = TelephonyManager.getDefaultPreferredNetworkType(0, NETWORK_MODE_WCDMA_PREF); 
	修改为： 
	int PREFERRED_NETWORK_MODE = TelephonyManager.getDefaultPreferredNetworkType(0, NETWORK_MODE_LTE_GSM_WCDMA);
REQUEST_SET_PREFERRED_NETWORK_TYPE

int NETWORK_MODE_WCDMA_PREF     = 0; 
int NETWORK_MODE_GSM_ONLY       = 1; 
int NETWORK_MODE_WCDMA_ONLY     = 2; 
int NETWORK_MODE_GSM_UMTS       = 3; 
int NETWORK_MODE_CDMA           = 4; 
int NETWORK_MODE_CDMA_NO_EVDO   = 5; 
int NETWORK_MODE_EVDO_NO_CDMA   = 6; 
int NETWORK_MODE_GLOBAL         = 7; 
int NETWORK_MODE_LTE_CDMA_EVDO  = 8; 
int NETWORK_MODE_LTE_GSM_WCDMA  = 9; 
int NETWORK_MODE_LTE_CDMA_EVDO_GSM_WCDMA = 10; 
int NETWORK_MODE_LTE_ONLY       = 11; 
int NETWORK_MODE_LTE_WCDMA      = 12; 
int NETWORK_MODE_TD_SCDMA_ONLY            = 13; 
int NETWORK_MODE_TD_SCDMA_WCDMA           = 14; 
int NETWORK_MODE_TD_SCDMA_LTE             = 15; 
int NETWORK_MODE_TD_SCDMA_GSM             = 16; 
int NETWORK_MODE_TD_SCDMA_GSM_LTE         = 17; 
int NETWORK_MODE_TD_SCDMA_GSM_WCDMA       = 18; 
int NETWORK_MODE_TD_SCDMA_WCDMA_LTE       = 19; 
int NETWORK_MODE_TD_SCDMA_GSM_WCDMA_LTE   = 20; 
int NETWORK_MODE_TD_SCDMA_CDMA_EVDO_GSM_WCDMA  = 21; 
int NETWORK_MODE_TD_SCDMA_LTE_CDMA_EVDO_GSM_WCDMA = 22; 

PRODUCT_PACKAGES += \
    TelephonyProvider \
    TeleService \
    rild 

PRODUCT_COPY_FILES += \
	device/hisilicon/bigfish/build/prebuilts/youfang/libreference-ril.so:vendor/lib/libreference-rilecyoufang.so \
	device/hisilicon/bigfish/build/prebuilts/youfang/chat:system/bin/chat \
	device/hisilicon/bigfish/build/prebuilts/youfang/ip-down:system/etc/ppp/ip-down \
	device/hisilicon/bigfish/build/prebuilts/youfang/ip-up:system/etc/ppp/ip-up \
	device/hisilicon/bigfish/build/prebuilts/youfang/apns-conf.xml:system/etc/apns-conf.xml \

         "ethernet,9,9,1,-1,true"
         "wifi,1,1,1,-1,true"
               "mobile,0,0,0,-1,true"
        "mobile_mms,2,0,2,60000,true"
        "mobile_supl,3,0,2,60000,true"
        "mobile_dun,4,0,2,60000,true"
        "mobile_hipri,5,0,3,60000,true"
        "mobile_fota,10,0,2,60000,true"
        "mobile_ims,11,0,2,60000,true"
        "mobile_cbs,12,0,2,60000,true"
              "mobile_ia,14,0,2,-1,true"
               "mobile_emergency,15,0,2,-1,true"
         "wifi_p2p,13,1,0,-1,true"
        "1,1"
        "0,1"
        "15,15"
        "9,9"
        "1,15"