Shell中怎么实现单机流量统计功能

本篇文章为大家展示了Shell中怎么实现单机流量统计功能，内容简明扼要并且容易理解，绝对能使你眼前一亮，通过这篇文章的详细介绍希望你能有所收获。

#!/bin/sh
usage(){
echo “Usage: $0 [-i INTERFACE] [-s INTERVAL] [-c COUNT]”
echo
echo “-i INTERFACE”
echo “    The interface to monitor, default is eth0.”
echo “-s INTERVAL”
echo “    The time to wait in seconds between measurements, default is 3 seconds.”
echo “-c COUNT”
echo “    The number of times to measure, default is 10 times.”
exit 3
}
readargs(){
while [ "$#" -gt 0 ] ; do
  case “$1″ in
   -i)
    if [ "$2" ] ; then
     interface=”$2″
     shift ; shift
    else
     echo “Missing a value for $1.”
     echo
     shift
     usage
    fi
   ;;
   -s)
    if [ "$2" ] ; then
     sleep=”$2″
     shift ; shift
    else
     echo “Missing a value for $1.”
     echo
     shift
     usage
    fi
   ;;
   -c)
    if [ "$2" ] ; then
     counter=”$2″
     shift ; shift
    else
     echo “Missing a value for $1.”
     echo
     shift
     usage
    fi
   ;;
   *)
    echo “Unknown option $1.”
    echo
    shift
    usage
   ;;
  esac
done
}
checkargs(){
if [ ! "$interface" ] ; then
  interface=”eth0″
fi
if [ ! "$sleep" ] ; then
  sleep=”3″
fi
if [ ! "$counter" ] ; then
  counter=”10″
fi
}
printrxbytes(){
/sbin/ifconfig “$interface” | grep “RX bytes” | cut -d: -f2 | awk ‘{ print $1 }'
}
printtxbytes(){
/sbin/ifconfig “$interface” | grep “TX bytes” | cut -d: -f3 | awk ‘{ print $1 }'
}
bytestohumanreadable(){
multiplier=”0″
number=”$1″
while [ "$number" -ge 1024 ] ; do
  multiplier=$(($multiplier+1))
  number=$(($number/1024))
done
case “$multiplier” in
  1)
   echo “$number Kb”
  ;;
  2)
   echo “$number Mb”
  ;;
  3)
   echo “$number Gb”
  ;;
  4)
   echo “$number Tb”
  ;;
  *)
   echo “$1 b”
  ;;
esac
}
 
printresults(){
while [ "$counter" -ge 0 ] ; do
  counter=$(($counter – 1))
  if [ "$rxbytes" ] ; then
   oldrxbytes=”$rxbytes”
   oldtxbytes=”$txbytes”
  fi
  rxbytes=$(printrxbytes)
  txbytes=$(printtxbytes)
  if [ "$oldrxbytes" -a "$rxbytes" -a "$oldtxbytes" -a "$txbytes" ] ; then
   echo “$(/bin/date +%Y%m%d-%H%M%S) RXbytes = $(bytestohumanreadable $(($rxbytes – $oldrxbytes))) TXbytes = $(bytestohumanreadable $(($txbytes – $oldtxbytes)))”
  else
   echo “Monitoring $interface every $sleep seconds. (RXbyte total = $(bytestohumanreadable $rxbytes) TXbytes total = $(bytestohumanreadable $txbytes))”
  fi
  sleep “$sleep”
done
}
readargs “$@”
checkargs
printresults

测试如下:

每三秒的流量,总输出999行,可以输出到文件里,其中:前面为时间,Rx Packets 是接收数据包,即下载,Tx Packets 是发送数据包,即上传.

代码如下:

[root@host]#sh t.sh -c 999  Monitoring eth0 every 3 seconds. (RXbyte total = 6 Tb TXbytes total = 5 Tb)
20101105-201539 RXbytes = 126 Kb TXbytes = 658 Kb
20101105-201542 RXbytes = 87 Kb TXbytes = 487 Kb
20101105-201545 RXbytes = 159 Kb TXbytes = 668 Kb
20101105-201548 RXbytes = 107 Kb TXbytes = 725 Kb
20101105-201551 RXbytes = 110 Kb TXbytes = 704 Kb
20101105-201554 RXbytes = 90 Kb TXbytes = 726 Kb
20101105-201558 RXbytes = 100 Kb TXbytes = 850 Kb
20101105-201601 RXbytes = 102 Kb TXbytes = 703 Kb
20101105-201604 RXbytes = 168 Kb TXbytes = 693 Kb
20101105-201607 RXbytes = 105 Kb TXbytes = 730 Kb
20101105-201610 RXbytes = 133 Kb TXbytes = 711 Kb
20101105-201613 RXbytes = 431 Kb TXbytes = 703 Kb
20101105-201616 RXbytes = 84 Kb TXbytes = 527 Kb
20101105-201619 RXbytes = 239 Kb TXbytes = 825 Kb
20101105-201622 RXbytes = 117 Kb TXbytes = 801 Kb
20101105-201625 RXbytes = 99 Kb TXbytes = 913 Kb
20101105-201628 RXbytes = 89 Kb TXbytes = 322 Kb
20101105-201631 RXbytes = 63 Kb TXbytes = 73 Kb
20101105-201634 RXbytes = 84 Kb TXbytes = 191 Kb
20101105-201637 RXbytes = 174 Kb TXbytes = 481 Kb
20101105-201640 RXbytes = 120 Kb TXbytes = 383 Kb
20101105-201643 RXbytes = 94 Kb TXbytes = 496 Kb
20101105-201646 RXbytes = 108 Kb TXbytes = 340 Kb
20101105-201649 RXbytes = 91 Kb TXbytes = 639 Kb
20101105-201652 RXbytes = 106 Kb TXbytes = 629 Kb
20101105-201655 RXbytes = 125 Kb TXbytes = 496 Kb
20101105-201658 RXbytes = 90 Kb TXbytes = 537 Kb
20101105-201701 RXbytes = 114 Kb TXbytes = 641 Kb

上述内容就是Shell中怎么实现单机流量统计功能，你们学到知识或技能了吗？如果还想学到更多技能或者丰富自己的知识储备，欢迎关注编程网行业资讯频道。